|
| |
Guidelines to purchase a
Sewing machine
Main
Article page |
Beauty articles
|
Health page |
Computers|
Diseases |
Education |
Entertainment |
Family
Business |Fitness|
Fruits and Vegetables
|
Jobs |
General |
Personality|
Technology
|
Tourism |
Useful Tips
Biography Page|
Heroes & Incredible peoples
|
Inventions
By Carolyn: When looking at machines for
purchase, it is important to sew on the machine yourself, in fact, you should
insist on it. You should plan ahead, and when you go to the sewing machine
store, know the kind of things you are interested in doing. Take pieces of
fabric, or whatever you plan to sew on. Do not let the sales rep do the sewing
on your fabrics.
1) Explain to the sales rep what you are interested in, what the problems are
with your current machine (if any?).
2) If the sales rep immediately takes to the most expensive machine in the store
and this was not your intent, be firm and insist upon seeing a machine more in
your price range. You may well end purchasing a machine that is outside your
price range, but that should be your decision and not that of the sales rep.
3) Let the sales rep give you a demonstration, make sure that when you sit down
you can see what the sales rep is doing. Sometimes the sales reps have a canned
demonstration and they go to fast, they make it flashy and impressive, but the
demo may be more technique rather than what the machine is capable of doing.
4) Ask your questions and then ask to sew on the machine yourself. If you do not
have fabric pieces, ask to test sew on real fabric, not the stiff demo cloth
that most sales reps use. Your own swatches are better because, you can carry
the same fabric around to the different shops, and truly have an accurate
comparison.
5) If you try something on a fabric (your own) and it does not work properly,
for example using a machine with a lot of embroidery stitches, you generally
have to stiffen the fabric, use a tear-away type of product. Decorative stitches
generally look nicer using 100% cotton thread and not necessarily as nice using
cotton-wrapped thread. Check out the thread.
6) Contrary to what a sales rep may say, swear to, etc. THERE IS NO SUCH THING
AS A MACHINE THAT HAS AN AUTOMATIC TENSION ADJUSTMENT. Remember, when using a
regular sewing machine (as opposed to a serger) there is thread on top of the
seam (your top thread - when threaded goes through tension system of some kind)
and the bobbin thread. In machines with a bobbin case, the tension is still
adjusted by adjusting that little bitty screw on the side of the bobbin, there
is no one, etc. that jumps out and automatically adjusts this little screw. You
must. The machines without a bobbin case (so-called drop-in bobbins), also have
a tension adjusting device. There may be some "automatic" mechanism to adjust
the top tension.
7) The stitching quality of a particular machine depends on a number of things
(a) the machine, (b) needles, (c) thread, (d) tension, (e) sewing technique, and
(f) the operator. All of these items are important. A good machine is wonderful
and can make sewing more pleasurable. You can hear it and see the results,
between a good machine and not so good machine.
8) If you are looking at the high end machine, for example Elna or Pfaff (there
are the two machines I own, so biased), be aware that both companies have a line
of machines that are of a different quality than there top line. Top line of
Elna is made in Switzerland, top line of Pfaff is Germany. The other line is
either made in Japan or China (not that these are necessarily bad, but they are
not the top of the line, the line that gives the brand its reputation). For
example, New Home is a Japanese built machine, they may have other lines that
are built in either Taiwan or Korea. When it comes to sergers by these
companies, it is most likely their sergers are made in either Japan or
Germany/Switzerland, but for sergers, this is okay. The original home-use
sergers came from Japan, they had the original technology.
By Christine: I just wanted to add a few notes to the great suggestions that
Carolyn gave about test driving a sewing machine. You may be able to get a used
machine in very good condition. There are some users who trade-in machines
because they don't have all the latest fancy gadgets, etc. Most shops will make
sure that the used machines are in tip-top shape for selling. Make a list of
your requirements and your questions before going to a store, so that you won't
get caught up in the heat of the moment and buy something that does way more
than you need it to or forget to ask something that could turn out to be
important. Be sure that the store will service the machine as well as sell it.
Consumer Reports recommends not purchasing an extended warranty from the store -
they say it's one of the biggest wastes of $. Many major credit cards offer an
extended warranty on purchases made with them. And finally, don't be afraid to
ask what may seem to the salesperson to be a silly question. A sewing machine is
a major investment and you have a right to have every t crossed and every i
dotted before you lay out $$.
( Courtesy: http://www.quilt.com/ )
| |
|
